Daisy-Themed Sewing Tool STL

About the project

I have an existing sewing-aid model and need the geometry replicated precisely while replacing its surface artwork with a crisp, nature-inspired daisy motif. The outside profile, overall dimensions and functional features must stay identical so the tool still fits my workflow, but every decorative area should now carry low-relief etched daisies instead of the current design. Inside the small “cup” at the side, cut round rows of uniform micro-dimples 0.75mm in diameter and 0.5mm deep. They need even spacing and consistent depth. All edges must remain smooth enough for lost-wax 3D printing and subsequent sterling-silver casting—no non-manifold edges or loose shells. I will send the reference photos as soon as we start; you return: • A watertight, print-ready STL with interior dimples, the new daisy artwork, and my logo on the adjustable band. • Please send the .stl for 3D printing before I sign-off I usually print in a 25 µm resin, so keep any relief details at least 0.3 mm deep for sharp casting. Feel free to use ZBrush, Blender, Rhino or similar—whatever gives clean topology and preserves the original scale. The adjustable band should be 0.9mm thick with the artwork etched in... to keep the outside of the piece smooth. The angles of the adjustable ring band are important. Once I check the size, shape, and artwork, the final file should slice cleanly in Lychee and pass Netfabb repair checks.

Skills required