Modular Razor CAD Design

About the project

I'm looking for a skilled mechanical CAD designer to create a fully functional prototype of our "Flip-to-Fresh" modular razor. The design should be done in Fusion 360. Key components to be designed: - Handle - Blade cartridge - Storage case Ideal skills and experience: - Proficiency in Fusion 360 - Experience in designing detailed mechanical components - Ability to produce fully functional prototype models 1. Project Overview I am developing a premium, mechanical safety razor targeted at men with heavy, multi-day beard growth. The design focuses on "honest" engineering: a heavy, solid-metal handle and a novel "flip-to-fresh" dual-sided pivoting head that eliminates clogging and plastic waste. I require an experienced mechanical CAD designer to produce manufacturing-ready files (SolidWorks or Fusion 360) for a prototype build. 2. Technical Schematic & Structural Blueprint The design must be fully symmetrical so that the head functions identically when flipped 180 degrees. 3. Critical Manufacturing Dimensions Handle: Length: 95.0 mm – 100.0 mm. Diameter: 12.0 mm – 14.0 mm (solid metal heft). Interface: M4/M5 coarse thread with a tapered 8.0 mm diameter shoulder seal (to lock the pivot base with zero wobble). Grip: 25.0 mm section of diamond knurling. Head: Width (Span): 45.0 mm. Depth: 25.0 mm. Corner Taper: 45-degree inward angle on all four corners for under-nose access. Shaving Geometry (The "Must-Haves"): Blade Angle: Fixed 30° to 35° attack angle for the Swedish surgical steel blade. Blade Gap: 0.7 mm (to allow heavy hair flow and prevent clogging). Exposure: Neutral to +0.05 mm (ensures clean contact). Pivot: Controlled-resistance pivot (25° range) integrated into the center axis. 4. Deliverables Required 1. Phase 1: Initial 3D model assembly for review. 2. Phase 2: Final native CAD files (SolidWorks or Fusion 360) and STEP files. 3. Phase 3: 2D technical drawings for a UK machinist and an injection molding house, detailing critical tolerances for the thread/taper interface. [ HEAD PIVOT AXIS ] _______( Hinge / Axle )_______ / \ | [ FRONT / SIDE A PROFILE ] | =======\__[ COMB/BAR ]/__======== | | [ SWEDISH BLADE A ] | | --------------------------------- | <--- 30° - 35° Attack Angle | [ SWEDISH BLADE B ] | | (Head rocks ~25° on axis) =======/¯¯[ COMB/BAR ]¯¯\======= | | [ REAR / SIDE B PROFILE ] | \______________________________/ || || <-- Internal Thread Socket ======================XX====================== <--- Tapered Shoulder Seal || (Secures base of pivot) || ||====================================== || || || HEAVY METAL HANDLE || <--- Solid Metal (MIM/Lathe) || (Knurled grip texture) || || || ||====================================== Please provide samples of previous work and relevant experience. Looking forward to your bids!

Skills required