Create Stainless-Steel Mounting Bracket CAD/STL File
AUD 10–30
About the project
CAD / STL File Required – Stainless-Steel Mounting Bracket I need an experienced CAD designer to create an accurate, manufacturing-ready 3D model of the mounting bracket shown in the attached technical drawing. Requirements: * Create an STL file suitable for 3D printing and prototype testing * Also provide the original editable CAD file and a STEP file * Follow all dimensions shown in the attached drawing * Overall height: 45 mm * Overall width: 33 mm * Overall depth: 17 mm * Material thickness: 1.5–2.0 mm * Inside gap: 11 mm * Bottom bend radius: 5.5 mm * Include both rectangular openings * Include the three rear mounting holes * Mounting-hole collars must project 2 mm and have a 4.7 mm outside diameter * Include the raised “B BOSS” branding shown on the front * General dimensional tolerance: ±0.2 mm The model must have clean geometry and be suitable for producing a physical prototype. Please check the completed model against the technical drawing before delivery. Deliverables: * STL file * STEP file * Editable/source CAD file * One rendered preview of the completed model Please provide your price and estimated turnaround time.
Skills required
This job is listed on Freelancer.com. AiZity aggregates listings for discovery only and is not the employer. Apply only on similar open jobs linked below.