Plastic Medicine Box 3D Design
USD 10–30
About the project
I need a compact 4-piece enclosure modelled for 3D printing that safely holds a small PCB on on below box side and loose pills or blister strips on the top of it. The entire unit must be printable in standard PLA/ABS plastic, and the each compartment (4 Compartments) has its lid , hinged piece that snaps shut cleanly without additional fasteners. The interior will require: • A partition or shelf keeping electronics and medication separate • Simple stand-offs or bosses so I can screw the PCB in place • Enough clearance for wiring and a coin-cell holder (roughly 3 mm above the board components) I will supply approximate board outline and pill dimensions once we start; you translate those into a ready-to-print STL/STEP file set plus a brief drawing with overall measurements so I can verify everything before hitting “print”. Native files from Fusion 360, SolidWorks or similar are welcome as well. Acceptance criteria • Hinged lid functions in simulation and respects printer tolerances (≈0.4 mm clearance) • Enclosure walls ≥1.6 mm thick, no unsupported overhangs beyond 45° • All parts fit on a 200 × 200 mm build plate If you have clever ideas for cable reliefs or internal clips, feel free to add them; otherwise keep it simple and clean so I can prototype quickly.
Skills required
This job is listed on Freelancer.com. AiZity aggregates listings for discovery only and is not the employer. To bid or apply, use the button in the sidebar.