SolidWorks Assembly & GD&T Drawings

About the project

I will send you a PDF sketch of a small mechanical assembly. Your task is to rebuild the entire assembly in SolidWorks, creating any missing components so that the model is complete and fully constrained. You will need to: • Review my sketch and identify any design issues. • Convert the concept into a proper engineering layout. • Recommend improvements for, manufacturability, and folding. • Create realistic 3D renderings that closely resemble a SolidWorks model. • Produce orthographic views (front, side, top). • Exploded assembly views. • Part drawings. • Assembly details. • Suggest hinge and locking mechanism details. The details are: Overall length of the beam: 4270 mm Main beam: 100 × 50 mm aluminium RHS Wall thickness: 1.6 mm Folds into three sections Two wheels only Wheel height: 120 mm from the ground to the underside of the RHS Telescopic handle mounted near the front wheel Quick-release clips rather than bolts for locking the folding joints Hinge geometry to minimise play. Locking clip placement. Structural stiffness and likely deflection is not required (no loads over). Once I upload the PDF, I can work with you. Once the 3-D model is finished, I need manufacturing-ready drawings for every part and for the overall assembly. Please dimension everything to full detail, applying appropriate GD&T call-outs so the drawings can go straight to the machine shop without further edits. Deliverables – all in the latest SolidWorks native formats plus PDF: • Complete, cleanly structured assembly (.sldasm) with mates verified • Newly created or updated part files (.sldprt) for any components that were not supplied • Fully detailed drawings for each part and the assembly showing dimensions, tolerances and GD&T I will consider the job complete when the model opens without errors, follows SolidWorks best practices (proper origins, feature tree organised, no rebuild warnings) and every drawing prints at 1:1 scale with legible, correct call-outs.

Skills required