DIN-Rail DMX Splitter PCB
USD 250–750
About the project
I need a compact PCB that takes one DMX-512 line in, delivers four fully-isolated outputs (minimum 1 kV isolation), and physically accepts the W6300-EVB-Pico2 module through simple pin headers so I can drop the board in and gain Wi-Fi connectivity straight away. The board will run from a 12 – 24 V supply and must clip onto a DIN rail in any orientation, so please keep the outline and mounting holes compatible with universal rail adapters. All power regulation, signal buffering and opto-isolation should be on-board; once I plug in the Pico2 I expect to configure it wirelessly without extra cabling. Essential deliverables • Schematic with clear isolation barriers and RS-485 line drivers • PCB layout, Gerbers and drill files ready for fabrication • Complete BOM with part numbers available from at least one major distributor • 3D step model to verify enclosure fit on the DIN rail • Brief bring-up guide showing how to flash and connect to the Pico2 over Wi-Fi I will sign off once the design passes an ERC/DRC check, shows 1 kV isolation clearance in the layout, and lets me power the board from 24 V, discover the Pico2 on Wi-Fi, and stream DMX to all four outputs without data loss.
Skills required
This job is listed on Freelancer.com. AiZity aggregates listings for discovery only and is not the employer. To bid or apply, use the button in the sidebar.