Bottle-Shaped Water Kiosk 3D CAD
USD 30–250
About the project
I need a full 3D CAD package that takes my bottle-shaped water-vending kiosk from concept to fabrication readiness. The model has to show the fiberglass exterior shell, the internal structural frame, all hinged service doors, mounting points, equipment layout, and exact utility stub-outs. I will be dropping an RO treatment skid, two storage tanks, booster pumps, electrical controls, ventilation fans, and a pair of dispensing inserts into the space, so leave parametric placeholders for each of those items; final dimensions will be swapped in later. Maintenance access is critical. Please build in proper service clearances and clean removal paths for the RO system, the storage tanks, and the electrical controls. Any panel or door that must open for routine work should swing a full 90° without obstructions. Deliverables • Native CAD assembly and part files (SolidWorks or Inventor preferred) • STEP/IGES exports for third-party review • 2D fabrication drawings with critical dimensions, weld symbols, and material callouts • Framing and anchoring details ready for structural engineer markup • A simple layer-named drawing set that can evolve into permit documents Acceptance will be based on a clash-free assembly, door swing simulations, and confirmation that every specified component can be installed and removed without cutting the shell. Size of the structure is Height: 14 ft (4.27 m) * Diameter/Width: 6.6 ft (2.0 m)
Skills required
This job is listed on Freelancer.com. AiZity aggregates listings for discovery only and is not the employer. To bid or apply, use the button in the sidebar.