Aluminium Dock Clamp Blocks
GBP 10–20
About the project
I’ve mocked up a simple pair of aluminium blocks and now need them turned into proper, machinist-ready CAD. Each block will finish at about 80 mm high × 60 mm wide × 100 mm deep. Rear face: the two halves close around a tube in a clamshell style. I’m thinking four Allen-head bolts (M5 or M6, two per side) will do the job, but if you see a cleaner fixing method that still lets the parts open easily, I’m all ears. Front face: a 20 mm through-hole receives a docking dowel that must lock in place with a sprung plunge pin. Because the blocks form part of a mobility mechanism, the pin fit and dowel clearance need to keep movement tight yet allow quick release. What I need from you • 3D CAD files (STEP or similar) of both halves plus hardware • 2D machining drawings with full dimensions, tolerances and call-outs • A concise parts list covering the plunge pin, bolts and any inserts I’ll run the STEP file through Fusion 360 to be sure everything imports cleanly and that the drawings give a machinist everything required—once those checks pass, the job’s complete. If anything in my sketch photo isn’t clear, just let me know and we’ll iterate quickly.
Skills required
This job is listed on Freelancer.com. AiZity aggregates listings for discovery only and is not the employer. To bid or apply, use the button in the sidebar.