Pantry Cabinetry Design & Materials List

About the project

I am looking for a cabinetry design and materials cut list for an off-kitchen U-shaped pantry. The project will be completed before 7 days and will include one revision after the draft is submitted. Deliverables include 2D and 3D renderings in pdf format as well as CAD file. CAD format must be Fusion360 compatible. The room dimensions are 104" long, 84" wide, and 108" high. There are no windows. There are two doors, opposing each other in the narrow walls. One door is 34" x 84", centered in the 84" wall. The second door is 24" x 24" and is 4" off of the floor and is centered on the opposing 84" wall. This door is utilized to transport groceries from a vehicle through sn exterior wall into the pantry area. There are no kitchen appliances - cooktop, oven, sink, refrig, coffee maker. The upper and lower cabinets will have a face frame. Inset Shaker style doors and drawers will be incorporated. All drawers will include full-extension drawer guides. The base cabinets will be 21" deep (as opposed to the standard 24") and 34.5 high. The base cabinets will extend down to the floor without a floor kick. A 0.75" thick solid surface material (stone, wood, etc.) will serve as a counter top.The base cabinets will be a mixture of open shelving and drawers. This ratio if drawers/doors/shelves calls upon your skill as a creative designer. Drawer sections will be between 21" and 24" wide with the top drawer depth of 4". The open shelving sections will be between 24" and 32" wide and the walls will align with the base cabinet walls. The upper cabinet walls and the face frame will extend to the countertop. The lower cabinet section in front of the 24x24 door will be a 3 drawer cabinet. The top 4" drawer functions normally. The bottom two drawer faces contain a single drawer without a back. This enables the groceries transfered through the door onto the drawer and will remain concealed until the drawer is pulled open. The 24x24 door will not be visible. The upper cabinets will be 12" deep and 42" tall. The bottom of the upper cabinets will be 18" above the counter top surface. The upper cabinets will be a mixture of open shelves and doors.

Skills required