Outdoor LED Torch Electronics & CAD
CAD 30–250
About the project
Medieval torch prop (~30–45 cm, handheld) for outdoor play. Working FDM-printable CAD draft exists in Fusion 360, but all dimensions are adjustable around your component choices. Concept already validated with basic parts; we now want production-grade design. Electronics scope: - Compact circuit: 1+ LEDs/small bulb with realistic flame flicker (not static blink) - On/off switch, user-replaceable AA/AAA battery compartment (no soldered cells) - Minimum 14–20 h runtime per battery set, justified with power calculations - Full off-the-shelf parts selection (part numbers + purchase links) CAD scope: - Rework enclosure in CAD (we used Fusion 360, but could be another CAD software) around your components (battery door, switch mount, wire routing) - Weather-resistant and durable for repeated outdoor handling - FDM-printable geometry with editable parametric history (f3d + STEP + STL) - Fit iterations based on our test prints To apply, answer briefly: - Your flicker approach (analog, flicker LED, or MCU) and why? - Proposed battery type + runtime math? - One past project combining electronics + 3D-printed enclosures? - Which CAD software, and can you deliver parametric history? - Begin your reply with "Grimoire" so we know you read this.
Skills required
This job is listed on Freelancer.com. AiZity aggregates listings for discovery only and is not the employer. To bid or apply, use the button in the sidebar.